1.5″ SnapLock 550 Standing Seam
Panel Information:
-
Panel Type: Standing Seam
-
Panel System: SnapLock
-
Panel Width: 19” Steel / 15″ Aluminum
-
Seam Height: 1.5”
-
Panel Material: 22 GA – 24 GA Min, 0.32 – 0.40
-
Panel Surface: Smooth / Embossed Optional
-
Panel Clip: Required Pre Engineering
-
Minimum Slope: 2/12
-
Substrate: Plywood (steel), Plywood, B-Deck, B-Deck with ISO (Aluminum)
Panel Testing:
-
Uplift Resistance: UL 580, UL 1897, UL 90
-
Air Infiltration: ASTM E 1680
-
Water Penetration: ASTM E 1646
-
Hail Rating: Class 4 Impact UL 2218
-
Fire Rating: UL Class A
-
Texas Department of Insurance Approval: RC-396*
-
FBC Non-HVHZ Approval: FL18316
Panel Notes:
- With this panel engineering, you may opt to
use heavier gauge coil and narrower width panels.
Clip spacing will not change. - Maximum coil width for engineered systems is 24.”
- This panel uses 5-1/8” of material to form the panel.
- This panel is approved for Weathertight Warranties
*Available in steel only.
